Pro Surface
Supply USA

PSS-GMT-14 · Gray flake blend

Gun Metal flake blend

Charcoal chips make up about 55%, with black, pale gray and white at roughly 15% each. A medium, cool-neutral gray floor with crisp light and dark flecks: more contrast than Midnight Granite, less than Checkmate.

Price
$85per 44 lb box, before freight
Ready to ship
Nov 152026, for pre-orders
Full broadcast
220 to 310sq ft per box, typical

Nothing is charged online. Submit your pre-order from the cart, and Adam confirms freight.

Rendered swatch of Gun Metal flake colors: charcoal, black, pale gray, white
Rendered swatch of the blend colors, not a photo

What is in Gun Metal?

Gun Metal is about 55% charcoal, 15% black, 15% pale gray and 15% white chips.

  • Charcoal
  • Black
  • Pale gray
  • White

Shares are approximate and are not a manufacturing specification. Compare physical chips on a test board before you match an existing floor.

Gun Metal specifications

Blend code
PSS-GMT-14
Chip size
1/4 in
Comparable in color to
Wombat (Torginol)
Color family
Gray
Look
Medium gray with white and black accents
Package
44 lb box
Price
$85 per 44 lb box, before freight.
Full broadcast coverage
About 220 to 310 sq ft per box (typical for 1/4 in chips)
Heavy partial broadcast
About 1,100 to 2,200 sq ft per box
Flake cost, full broadcast
About $0.27 to $0.39 per sq ft
Systems
Epoxy and polyaspartic floor coatings (base coat, broadcast and topcoat guide)
Availability
Pre-orders open now online. Grand opening Monday, November 9, 2026. Ready to ship November 15, 2026.
Ships from
Spokane Valley, WA to anywhere in the U.S. (how freight is quoted)

We list the reference only so you can match a color. Pro Surface Supply USA is not sponsored or endorsed by Torginol.

Coverage figures are typical ranges from published manufacturer guidance, not guarantees. Actual use depends on broadcast technique, base coat thickness and the coating system. Always follow your resin manufacturer's system guide. Use the flake calculator to size a job.

How Gun Metal reads

From standing height, Gun Metal reads as a medium charcoal gray. Up close, black and white flecks stand out against that field, so the floor has definition without the busy look of an equal-parts blend.

More than half the chips are one color, charcoal, and that color sets the overall tone. The rest, about 45%, splits evenly between black, pale gray and white. The pale gray and the charcoal both lean slightly cool, so the floor reads cool-neutral rather than warm.

Gun Metal next to our other grays

Shares in this table are approximate.

Blend From standing height Largest share Black White
Checkmate Light to medium gray, high contrast Black, 34% 34% 33%
Gun Metal Medium gray, crisp accents Charcoal, 55% 15% 15%
Midnight Granite Dark gray, low contrast Charcoal, 40% 10% None
Stone Ridge Light cool gray Four colors, 25% each None 25%

Where Gun Metal works

  • Daily-driver garages. A mid gray field is forgiving on a floor that sees cars, boots and tools every day.
  • Shops and service bays. It looks like a working floor without reading dark or gloomy under shop lights.
  • When the homeowner cannot decide. If Checkmate feels too busy and Midnight Granite too dark, Gun Metal sits between them.

Dirt, tire marks and dust on Gun Metal

Gun Metal is the most even-handed of our grays. Its mid gray field sits between dark tire marks and light dust, and its black and white accents give both somewhere to hide.

It will not hide light dust quite as well as Checkmate, which has more than twice the white, or dark grime as well as Midnight Granite's darker field. For a floor that sees mud in one season and dust in another, that balance is the point.

What base coat goes under Gun Metal?

Tint the base coat medium gray to match the charcoal chip. With more than half the blend in that one color, a thin spot over a matching base is hard to find.

A white or black base only works if every square foot is broadcast to refusal. Otherwise, any thin spot shows as a patch of white or black in the middle of the charcoal. The base coat build itself comes from your resin manufacturer's system guide.

Matching an existing floor

Gun Metal is comparable in color to Wombat (Torginol). Wombat also reads as a charcoal-led gray with black, pale gray and white flecks.

For a repair, an addition or a second bay next to an existing Wombat floor, broadcast a test board with our chips, lay it against the old floor before committing, and email Adam with the job details first.

Ordering for one car garages and double broadcast

A one car garage of 240 to 288 sq ft takes 1 or 2 boxes at a full broadcast. Order 2 unless you know your crew broadcasts light, because a single 44 lb box leaves almost no margin.

Floor Boxes to order Flake needed
240 sq ft (12 x 20 ft) 1 to 2 40 to 48 lb
264 sq ft (12 x 22 ft) 2 44 to 53 lb
288 sq ft (12 x 24 ft) 2 48 to 58 lb
400 sq ft, double broadcast 4 134 to 160 lb

Low numbers assume the typical 0.167 lb per sq ft; high numbers assume the 0.20 planning rate. At 264 sq ft the typical rate needs about 44.1 lb, just over one box, so order 2. Double-broadcast systems use about twice the flake of a single broadcast, which is why the last row needs 4 boxes for a floor that takes 2 when broadcast once. One box is $85 and two are $170, before freight. The flake calculator handles other sizes.

Questions contractors ask

What colors are in Gun Metal flake?

Four colors: about 55% charcoal and roughly 15% each of black, pale gray and white. The charcoal sets the overall tone and the other three act as accents.

Which existing color is Gun Metal comparable to?

Wombat (Torginol). We list the reference only so you can match a color. Pro Surface Supply USA is not sponsored or endorsed by Torginol. For a repair or a second bay beside a Wombat floor, try Gun Metal chips on a sample board against that floor first.

What is the difference between Gun Metal and Checkmate?

Gun Metal is mostly one medium charcoal with black and white accents at about 15% each. Checkmate is roughly equal thirds of black, gray and white. Gun Metal reads darker and calmer; Checkmate reads lighter and busier.

Is one box of Gun Metal enough for a one car garage?

Only for a small one, and only at the typical rate. A 240 sq ft floor needs about 40 lb at the typical rate and 48 lb at the planning rate, so order 2 boxes unless your crew reliably broadcasts light.

Does Gun Metal hide tire marks?

Reasonably well. The black chips (about 15%) and the mid gray field hide dark rubber marks. Midnight Granite hides them better; Stone Ridge shows them sooner.

Is Gun Metal flake metallic?

No. Gun Metal names the color, not a metallic finish. The blend is charcoal, black, pale gray and white flake with no metallic or glitter chips; the shine on a finished floor comes from the clear topcoat.

Grand opening Monday, November 9, 2026

Pre-order Gun Metal before opening day

Pre-order now. Ready to ship November 15, 2026. Every blend is $85 per 44 lb box, before freight. Add boxes to your cart and submit your pre-order online; Adam reviews it, quotes freight and contacts you to confirm. Nothing is charged online.